Original Xhorse VVDI2 Commander Key Programmer With Basic, BMW and OBD Functions, Newly Add BMW FEM/BDC Function

Xhorse VVDI2 Key Programmer With Basic, BMW and OBD Functions

This VVDI2 with Activated Software List:

1) VB-01 BMW OBD
2) VK-01 Transponder Programmer
3) VJ-01 Passthru J2534

If you need VB-02 BMW CAS4, please pay to VVDI2 BMW CAS4+ Function
If you need VB-03 BMW FEM/BDC, please pay to BMW FEM/BDC Function

VVDI2 - BMW FEM/BDC system (function released and available)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.锛團EM 95128 chip, BDC 95256 chip锛塽sually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

Package List:


1. VVDI 2 Main Interface
2. 5th BDM Programmer
3. OBD2 cable
4. CAS Plus (additional part, need to buy alone CAS Plug for VVDI2 BMW or Full Version : 84.99usd)
5. Remote Programmer
6. USB Cable